Chelcie's Monthly Pick Of The Bunch

Hi,

I hope you are well & thanks for checking out my Monthly selection of available Maintenance, Reliability & Controls candidates which details a small selection of candidates who are currently seeking a new opportunity in your area.

Please contact me to find out more any of these candidates, or simply click on the relevant link to send me an email, alternatively, if none of these candidates match your requirements, or if you would like to discuss a current or future need, then please let me know.  I have Engineers of various skill-sets and experience register with me daily, plus an extensive in-house database that has been developed over 30 years, and access to all the leading Job Boards.

I hope you find this useful, and I hope to be able to assist you with your recruitment requirements, either now or in the future.

Chelcie Coyne
Senior Recruitment Consultant
Maintenance, Reliability & Service Engineering Division

   0121 321 4307    |       chelcie.coyne@probejobs.co.uk    |       Let's Connect on LinkedIn

 

ENGINEERING MANAGER CC24061
Heavy Manufacturing Industry
  • This candidate is apprentice trained and holds City & Guilds 17th edition and City & Guilds Level 3 in Electrical installation engineering.
  • Holds PLC controls such as Allen Bradley, Mitsubishi and Siemens and has used robots in the past such as Fanuc and ABB. 
  • Managed a team of 16 with 6 direct reports 10 indirect and assist with the mechanical team man management when required.
  • These duties include but are not limited to (121’ s training and development, leading team days, briefings, disciplinary procedures, time and attendance, overtime requests, toolbox talks, holiday management, authorisations, recruitment, standards maintenance, coaching and mentoring, rewards, mid and end of year reviews
  • Project management from, scope, tendering, proposal and specification checks with technical document review, action plans
Days Shifts Burton upon Trent c£65,000 >> Learn More

 

MAINTENANCE ELECTRICIAN CC24062
Rail / Textiles Industry
  • Based in Nottingham is Apprentice trained as an Electrician with City & Guilds Electrical and Electronic Craft Studies.
  • Worked as part of a team using preventive and reactive maintenance on M/C tools and assembly lines and calibrating test equipment.
  • Work with specialist equipment, such as programmable logic controllers (PLC), which control machinery on factory assembly lines.
Days Shifts Nottingham c£40,000 >> Learn More

 

MAINTENANCE ELECTRICIAN CC24063
Automotive / Manufacturing Industry
  • This candidate based in Derby holds an NVQ Level 3 in Engineering Maintenance. They worked at Toyota for 20 years and joined the company as Team Member within production environment and then progressed through studying BTEC and NVQ.
  • Worked as a team Member Maintenance-Paint Shop into Maintenance Department. Responsible for all aspects of maintenance including daily checks on machinery identifying faults and correcting malfunctions to ensure no line stoppage.
  • Has had exposure to Fanuc and Kawasaki robots and Mitsubishi.
    • Is used to working towards Kaizen / continuous improvement and is after a new role due to job security.
Days Shifts Derby c£35,000 >> Learn More

 

MAINTENANCE ELECTRICIAN CC24064
Electronic Manufacturing Industries
  • Is seeking a new role as they want to be based at one plant not travelling and down the UK.
  • Is Apprentice trained to BTEC Level 3 in Electrical Engineering with City & Guilds Level 3 Certificate in Electrotechnical Technology.
  • Ability to use handheld and crimping tools, Power tools such as handheld Drills, Dremel’s, impact drivers, and Drilling / milling machines.
  • Has experience with the manufacturing, Panel building Central battery Systems using wiring diagrams. Battery backup power Builds. Electrical installation works, Single / Three phase connecting Mains to Central battery systems and distribution boards.
Days Shifts Sheffield c£34,000 >> Learn More

 

MAINTENANCE ELECTRICIAN CC24065
Distribution Industry
  • Based in Shepshed, is seeking a new role to come off 12-hour shifts. Holds Level 3 in Electrical Installation.
  • Is now a competent multi-skilled engineer who attends to engineering faults both mechanical and electrical, using SCADA systems to maintain and improve performance to maximise efficiency around the site.
  • Has experience in both reactive and preventative roles working with a variety of automated manual handling equipment, storage retrieval systems and facilities equipment
Days / Double Days Shifts Loughborough c£37,000 >> Learn More

 

MAINTENANCE ENGINEER / SUPERVISOR CC24066
Manufacturing / Food Industries
  • Spent over 25 years at Cummins Daventry until he was made redundant in June.
  • Holds a 4 Year Mechanical Craft Apprenticeship with BTEC in Engineering and HNC in Mechanical & Production Engineering.
  • Also holds some Management training with IOSH and ILM Level 3.
  • Has formal training with INTACS - Customised Electrical Health and Safety with Safe Electrical Isolation, Lock Off and Test for Dead.
  • Is Mechanically biased with good Electrical skills. PLC experience includes Siemens and Allen Bradley and has worked with Single & 3 Phase Motors and pumps.
  • Has equal abilities with hydraulics & pneumatics, can weld using Arc & Mig and has worked with conveyors, chains and belt drives.
Open to all Shifts Northampton c£45,000 >> Learn More


Browse

17 Jobs Found

 

As specialists in the field, our client has progressed to become a market leader in high precision engineering throughout the United Kingdom and worldwide. This is a superb opportunity for a Calibration Engineer to join the team on a double day shift. The successful candidate will manage the calibration of all inspection equipment and the control of the issuance and receipts of all gauges.

Benefits for the role of Calibration Engineer: 

  • Salary depending on experience £31,000. 
  • Double day shift 0600-1400 Monday – Thursday and 0600-1230 Friday. Then the Afternoons are 1400-2400 Monday- Wednesday and 1400-2230 Thursday with Fridays off on the Afternoons week. 
  • 34 Days Holiday 
  • Company Pension 
  • Bonus

Key Duties for the Calibration Engineer: 

  • To embrace all the Company’s core values.
  • To have ownership and full accountability for all calibration.
  • Have a good knowledge of all inspection processes.
  • Have a good understanding of all inspection capabilities.
  • To ensure all inspection equipment are fully up to date to comply with ISO 9001:2015.
  • To work with the purchasing department to ensure all externally calibrated items are delt with quickly, efficiently and within the financial budget.
  • To raise and propose the purchase of new replacement inspection equipment when the current items are not fit for purpose.

Requirements of the Calibration Engineer: 

To excel in this role, you must meet the following criteria: 

  • Minimum Engineering Apprentice trained NVQ3 
  • Proficiency in using calibration equipment and understanding measurement standards is crucial.
  • Experience in calibration labs, testing, or related sectors is highly valuable.
  • Proficiency in using calibration equipment and understanding measurement standards is crucial.
  • Knowledge of relevant industry standards ISO9001.
  • Experience with calibration development tools and software is beneficial.

This role is commutable from Derby, Nottingham, Leicester and Tamworth.

 

Probe Technical are looking to recruit a temporary 12-week contract for a Panel Wirer to be based at a business in Worcester. They are a lovely small firm which are extremely busy and due to annual leave need some cover. You will be responsible for ensuring the precise installation of electrical wiring and associated materials to schematic and engineering drawings. 

The package details for the role of Panel Wirer include the below and further at interview:

  • Hourly rate of £17 p/h 
  • Monday – Friday 8am – 4pm 
  • Standard Pension 
  • 20 + Bank Holidays 
  • There is overtime on offer but paid at the normal rate 
  • Minimum 12 week contract

You must have a minimum 3-year previous experience building & wiring panels. Good numeracy and literacy skills. BS7671 18th edition desirable.

Other key duties and experience for the Panel Wirer role involve:  

  • Perform panel layout, assemble components into panel.
  • Wiring panels.
  • Read, interpret and work from schematic / engineering drawings / instructions from engineers
  • Site based installations and Panel modifications
  • Undertaking all relevant tasks along with general housekeeping duties.
  • Occasional site visits for trouble shooting, repairs or installation.
  • Machine wiring experience advantageous

The Panel Wirer role is commutable from Worcester, Kidderminster, Tewkesbury and Evesham

 

Probe Technical are looking to recruit a full time and permanent Tool Room Engineer to join a busy fast paced manufacturing environment that supply to a range of industry sectors such as garden, home, catering, aerospace and automotive. You will be ensuring optimum performance and safe operation of all Mould tools to assist in the efficient running of the plant whilst maintaining good housekeeping. 

The package details for the role of Tool Room Engineer include the below and further at interview:

  • Salary £35,000 rising to £38,000 after probation 
  • Monday – Friday 8am – 4.30pm 
  • Company pension matched up to 8%
  • 25 days holiday + Bank Holidays 
  • Health care plan 
  • Excellent discount on company products 

You must hold a time served apprenticeship in toolmaking, machining or engineering. Knowledge of injection moulding process is beneficial and being able to read technical drawings. 

Other key duties and experience for the Tool Room Engineer role involve:  

  • Carries out breakdown maintenance on all mould tools, jigs, fixtures etc.
  • Carries out preventative maintenance on all mould tools, jigs, fixtures etc.
  • Carries out projects associated with tools, tooling and/or manufacturing equipment as requested by the Tool Room Manager.
  • Provides shift cover in the Tool Room when required.
  • Attends college/training courses where applicable.
  • Ensures conformance to the Company Quality System procedures as documented.

The Tool Room Engineer role is commutable from Oxford, Banbury, Daventry, Southam and Buckingham 

 

As specialists in the field, the business has over 40 years’ experience and specialises in design and construction. As a business which is committed to investing and developing its people, all employees have the opportunity to grow within the company. If you have a long-term career goal, we can help you get there!

This is a superb opportunity for a Plant Fitter to join the team on a Morning shift 6am – 2.30pm Monday – Thursday and 6am – 1.30pm on a Friday. The successful candidate will be responsible for the manufacture, modification, maintenance, and repair, of a variety of piling equipment and ancillaries, ensuring that the fleet remains in prime working condition.

Benefits for the role of Plant Fitter: 

  • This role is weekly paid, on an hourly rate of £16.93. 
  • 39 hours a week, Monday to Friday.
  • 22 days holiday + 8 Bank holidays and Christmas Shutdown 
  • Company Pension at 3% providing employee pays 4% weekly paid staff  
  • Overtime 

Key Duties

  • As a Plant Fitter, your key responsibilities will include: 
  • Using appropriate processes and techniques, you will read and interpret engineering drawings to complete manufacture and modification as requested.
  • Experience and skill of fault-finding, maintenance and repair of heavy-duty construction plant and hydraulic systems would be ideal.
  • Use appropriate hand and power tools to complete tasks
  • Use appropriate processes and techniques to complete tasks
  • Read and interpret engineering drawings

Requirements of the Plant Fitter 
To excel in this role, you must meet the following criteria: 

  • You must hold a full UK driving licence and a Level 2 qualification in Plant Maintenance or equivalent.
  • This is a fitter role for the rigs not the factory, so previous experience is needed in heavy plant/ construction equipment. 
  • Although this role is not a mobile fitter role, they will be expected to go out to sites to attend breakdowns and general repairs, so need to have a driving licence. 
  • Experience with JCB’s and CAT
  • Welding and fabrication 

This role is commutable from Derby, Burton upon Trent, Swadlincote, Tamworth and Leicester. 

 

Probe Technical are looking to recruit a Maintenance Engineer on an early and lates shift. This is an outstanding opportunity to join the UK subsidiary of a large multi-national company. This is a great role for someone who is hands-on, technical, and operational. As part of a top manufacturing group, you will be required to maintain plant and machinery to a high standard through PPM and proactively schedule maintenance works to maximise service levels.

The package details for the role of Maintenance Engineer include:

  • A salary banding that’s negotiable up to £45,000 depending on experience.
  • Company Pension which is a salary sacrifice
  • Holidays starting at 23 and increasing to 28 with service. 
  • Rotating 2 shifts Monday – Friday 

As a Maintenance Engineer this will be a high-pressured environment so the ability to be able to work well under pressure is a pre-requisite of the position, in addition the ideal candidate will be: 

  • To hold a level 3 Engineering or Maintenance qualification 
  • Have a strong electro / mechanical aptitude and thrive in a fast-paced environment 
  • Can troubleshoot and repair sophisticated machinery (such as electrical, pneumatic or mechanical systems) 
  • Can respond urgently to immediate problems and be disciplined enough to plan routine tasks, future improvements and preventative maintenance 
  • Good understanding of lean manufacturing techniques (such as 5S, Kaizen, TPM, AM & PM).

The Maintenance Engineer role is commutable from Derby, Nottingham, and Leicester. 

 

Probe Technical are looking to recruit a full time and permanent Maintenance Electrician to join a busy fast paced manufacturing environment that supply to a range of industry sectors such as garden, home, catering, aerospace and automotive. You will be part of a Maintenance team of 6 working a double day shift pattern of 6am – 2pm / 2pm – 10pm. This is an outstanding opportunity to join such a lovely business with an excellent Maintenance Manager. 

The package details for the role of Maintenance Electrician include the below and further at interview:

  • Salary from £45,000 depending on experience 
  • Monday – Friday 6am – 2pm / 2pm – 10pm
  • Company pension matched up to 8%
  • 25 days holiday + Bank Holidays 
  • Health care plan 
  • Excellent discount on company products 

You must hold a minimum Level 3 in Electrical or Mechanical and training in 17th / 18th Edition IEE wiring regulations, or equivalent. You must be a multi-skilled engineer with Electrical bias with either Injection Moulding, packaging, print, FMCG, plastics or food experience.

Other key duties and experience for the Maintenance Electrician role involve:  

  • Previous experience with Hydraulic drawings and pneumatics 
  • Diagnose hydraulic valve or cylinder issues 
  • Electrical fault-finding experience 
  • When reactive job is allocated ensure that the task is personally owned and followed through to completion or when shift handover required the maintenance supervisor is given all the correct information.
  • Personally own any planned preventative tasks issued and liaise with operations to ensure task is completed to a high standard, with minimal operational disruption.
  • The Maintenance Electrician role is commutable from Oxford, Banbury, Daventry, Southam and Buckingham