MAINTENANCE ELECTRICIAN

A fantastic new opportunity for an electrically-biased Maintenance Engineer to join a leading specialist manufacturer. This is an opportunity to join an established organisation who have 50+ years within the industry. This is an award-winning organisation who hold a very strong track record. 

This is an opportunity for a driven, motivated Engineer who is confident and holds strong electrical abilities, an opportunity to join an already established maintenance team. 

The Maintenance Electrician role is commutable from the following locations:  Rochdale / Bolton / Manchester / Oldham 

Benefits the Maintenance Electrician will receive: 

• Salary: £48,961    
• 6% Pension scheme 
• Life Assurance 
• 33days holiday
• Medical Care 
• Healthcare
• Overtime 

Shift in place: Days – Monday to Friday. 7:30am till 4pm – Early finish on a Friday. 

Call out system in place – you will be required to work a 1in5 call out system. 

Duties and requirements the Maintenance electrician will hold and be responsible for: 

• Previous experience within a similar role is essential to this role. 
• Strong fault-finding abilities. 
• Prove experience within a manufacturing environment. 
• Proven experience with: AC & DC Drives, Installation experience, Wire testing, Panel Building, Instrumentation. 
• Experienced with Siemens PLC’s – strong fault-finding abilities – Programming would be at an advantage.  
• Planned preventive maintenance. 
• Carry out routine servicing and inspection on all production machinery. 
• Carry out essential testing of equipment and systems. 
• Ideally holding experience with ATEX equipment. 
• Ideally, we are looking for a 70/30 split as there will be some mechanical requirements. 
• We are looking for an Apprentice trained maintenance electrician. 
• Holding a Formal qualification in Electrical engineering – City & Guilds Level 3 or NVQ Level 3 
• 17th / 18th IEE Wiring regulations. 
• City & Guilds 2391 Testing 
• UK Driving licence required / Travel to alternative sites required – all site located in within 5Miles of one another. 
• Must be happy to work the required call out system. Working 1in5 calls – this is split between engineers. 

This will be an opportunity for a qualified Maintenance Electrician to join an established Manufacturing / Textiles organisation with a proven record of providing quality products. Offering stability and a supportive work environment, you will be joining an established team on site who can support your transition into the organisation.

Shift requirements for the Maintenance Electrician: 

Days – Monday to Thursday 8am till 16.45pm / Friday 7am till 15:00pm 

Benefits:

The company have recently brought in a flexible working scheme, they offer the following: 5 Medical days to attend appoints – Doctors / Hospital, they also offer a Holiday Purchase scheme giving you the opportunity to purchase and additional 5days per year – this will be on top of the 26+8days. On top of this they also give all employees a day off on their Birthday. 

Additional Benefits the Maintenance Electrician will receive: 

• Life Insurance
• Company Pension
• Cycle to work scheme
• Gym Membership
• Healthcare
• Employee assistance programme
• Discounts for retailors
• Shutdown over Christmas. 

Ideally the Maintenance Electrician will hold the following experience: 

• Experience in an engineering maintenance or service role is essential. 
• Holding fault finding abilities with Siemens and Allen Bradley PLC’s 
• Excellent fault -finding skills are crucial, especially; motor drives, temperature controllers, able to fault find on PLC and other control systems.
• Competent in mechanical repairs
• Experience carrying out preventative maintenance tasks.
• Ability to facilitate repairs under pressure.
• Flexible and able to adapt to situations as they occur.
• Able to work in a team and independently.
• IT literate; including Microsoft Office applications (Excel, Word, Outlook,), Gradus CMMS system.
• Familiar with building maintenance tasks
• Apprentice trained. 
• Educated to HNC in Electrical Engineering (or equivalent)
• Extensive Electrical knowledge 18th Edition 
• Full valid UK Driving Licence
• Flexible – as you may be required to travel to alternative sites on occasions within the Cheshire Area, Expenses Covered. 

The Maintenance electrician role is commutable from the following locations: Stockport / Stoke-On-Trent / Macclesfield 

We are currently assisting a Leading organisation in their search for Maintenance Team-Leader – Electrically Trained 

This is an opportunity to join an already established maintenance team, and to join a company who have Sites throughout the UK as well as overseas. A company who drives training and development on site and pride themselves on a good working environment. 

The Maintenance Team-Leader with support a Team of 3 electrical engineer’s and X2 Apprentices, reporting directly into the Maintenance Manager. 

Benefits

• Offering a salary of £47.800 
• 25 + 8 days holiday
• Life Assurance
• Company Pension
• Healthcare
• Share Scheme
• Training & Progression
• + More 

Shift requirements: Monday to Friday – Days – 8am till 5pm  - Early finish on Friday. 

The Maintenance Team-leader’s role is Commutable from the following locations: Bolton / Oldham / Stockport / Manchester  

Key Responsibilities for the Maintenance Team-leader:  

• Working closely with the Maintenance Manager 
• Material Control – Making sure all Parts, Tools and materials are available 
• Provide Support and resource on Project work 
• Carry out inspections and audits, provide advice and feedback and support as and when needed. 
• Ensure Deadlines are met on Plant 
• Supporting permanent engineers as well as Contractors on Plant. 
• Attend maintenance meetings as and when required. 

Experience the Maintenance team leader will hold: 

• Previous experience within a Team-leaders’ roles – Senior position 
• Experienced within FMCG / Manufacturing / Heavy engineering environments
• Must be Electrically biased – Strong Fault-finding abilities. 
• Hold Good leadership skill / Great Communicator. 
• Able to use Excel / Power point / Word and Email. 
• Must be apprentice trained – holding formal qualifications in electrical engineering. 

This is an exceptional opportunity for a Maintenance Engineer to join a leading Manufacturing organisation based in the Greater Manchester Area, 

Are you looking to join an organisation that pride themselves on Growth and development. A company that can offer an exciting new challenge. An opportunity to join a leading organisation who are known world-wide. If so then this might be role for you!! 

The Maintenance Engineer’s position is commutable from the following locations: Hyde / Manchester / Ashton-under-Lyne / Salford / Stretford / Denton 

The Maintenance Engineer will be required to work the following shift: 

Days: Sunday 8am till 16:30 / Monday 6am till 6:30pm / Tuesday 6am till 6:30pm / Thursday 8am till 6:30pm 

Off Days: Wednesday / Friday / Saturday. 

Benefits the Maintenance engineer will receive: 

• Salary: £40,380  
• Sick-Pay, 
• Pension, 
• Private medical / Dental Options 
• Cycle to work scheme. 
• Cash back from Various Retailers 
• Life Assurance. 
• Childcare vouchers, 
• Generous holiday, 
• Gift Vouchers and More

Duties and requirements the Maintenance engineer will hold and be responsible for: 

• Previous experience within a Heavy Manufacturing Environment 
• Proven experience within a Similar Role, Conducting Mechanical repairs 
• Experience with Hydraulics & Pneumatics, Gearboxes, Conveyor systems, Granulators, Lifting equipment.  
• Welding and Fabrication abilities
• Carry out essential maintenance on all aspects of the production lines.
• Work through a programme of PPM and helping develop the agility maintenance system.
• Improve factory OEE through development and innovation of the production facility.
• Order and Collect Spare Mechanical materials.
• Maintain and monitor the machines and Equipment. 
• Ensure that all plant and machinery s kept in good working condition. 

Qualification the Maintenance Engineer will hold: 

• Apprenticeship Trained 
• BTEC ONC & BTEC HNC Mechanical engineering  
   

Are you looking for a New Exciting opportunity?

Are you an experienced Maintenance Administrator / Planner with proven experience within a Manufacturing environment, and are you looking to join a Busy & Friendly organisation based in the Manchester Area? If so, we have a fantastic opportunity. 

We are currently recruiting for an international organisation based in Manchester area who are looking to appoint a Maintenance Administrator / Planner to join their already established team. This is an exciting opportunity to join an organisation that continues to Grow and Invest. 

This role is commutable from the following locations: Stretford / Sale / Stockport / Salford 

The Maintenance Administrator will be required to work Monday to Friday 8am till 4pm 

Benefits on offer to the Maintenance Administrator 

• Salary: £32,000 - £36,000 DOE 
• 5.5+3.5 Pension Contribution 
• 25+8days holiday 
• 4 x Life Assurance 
• Health care 
• Company Bonus 
• Employee Assistance program 
• Free Parking / EV Parking 

Ideally the Maintenance Administrator will have the following: 

We are looking for an Ambitious forward-thinking individual who holds desire to make continuous changes to carry the business forward. 

Requirements: 

• Previous Experience within a Manufacturing Environment is essential  
• Proven Experience within a Maintenance Administrator or Planners role. 
• Experienced within Maintenance – Mechanical / Electrical – Electronic Engineering 
• Apprentice trained. 
• Qualified in Mechanical or electrical engineering. 
• Must hold experience with SAP Administration. – SAP Maintenance – Procurement. 

Duties: 

• Develop new Maintenance Management System (GSAP)
• Plan maintenance activities, reactive repairs and improvements across the
• two MMFL sites
• Ensuring routine preventative plant maintenance is carried out as necessary
• and in a timely manner.
• Prioritise maintenance requirements to suit business needs.
• Ensure that team members have an adequate workload daily.
• Ensure that works raised at daily Midel production meetings are progressed
• and captured within the MMS.
• Develop meaning full KPI’s based on maintenance activities

Service Engineer (Mechanically Biased) – Blackburn Based 

Are you a skilled Service Engineer – mechanically biased looking for a new challenge? Want to work with a company that values experience, offers variety, and gets you home for a long weekend every week?

We’re on the lookout for an Apprentice-Trained Service Engineer with a strong mechanical bias to join an established team. Based in Blackburn, you’ll travel to key customer sites across Bristol, Scunthorpe, Cumbria, and Leicester, providing top-tier service and support.

Location: Blackburn (with travel to Bristol, Scunthorpe, Cumbria & Leicester)
Hours: Monday to Thursday, 07:30am – 5:00pm (4-day working week!)

Benefits for the Service Engineer

• Salary: Offer a Salary from £35,000 - £40,000 
• Overtime Available 
• Company Van
• Full-Time, Permanent
• Pension 
• 20 + 8 Days Annual Leave 
• iPad
• Company Credit Card
• All Expenses Covered
• PPE

Experience & Requirements for the Service Engineer.  

• Apprentice trained and qualified to Level 3 in Mechanical Engineering (essential)
• Experience in sewage treatment, recycling plants, or heavy engineering environments is highly desirable
• Comfortable with UK-wide travel (Monday–Thursday)
• Strong diagnostic and problem-solving skills
• Self-motivated with excellent customer service abilities
• Servicing, repairing, and maintaining mechanical equipment on customer sites
• Providing technical support and ensuring machinery runs efficiently and safely
• Carrying out planned and reactive maintenance
• Working closely with site teams to ensure high standards are met.

We are seeking to recruit a Service Engineer (Mobile Plant Engineer) for one of the largest privately owned Engineering businesses in Europe. This is an exciting opportunity for a Service Engineer to join their manufacturing team based at any of the facilities in the UK. 

You will be responsible for ensuring plant availability and engineering resource is available when required to assist the operational function at any location. You will provide technical advice, assistance and intervention to ensure the safe and efficient operation of all plant assets as well as carrying out machine malfunction rectification work.  

Benefits for the Service Engineer role include:

• Working 37 hours a week, over a 4-day week! Monday to Thursday: 7.00am to 4.45pm
• Hourly rate of £19.86 
• 25 days plus bank holidays
• Pension is 5% employee and 4 % employer
• Company van provided 
• Overtime Available 
• Support in furthering your career with advanced programmes 

A general level of education together with EITB Certificate of Craftsmanship or equivalent and an IEE 17th/ 18th edition wiring regulations certificate. Must have a mechanical and electrical maintenance background preferably within a manufacturing environment. Duties for the Service Engineer include: 

• Able to demonstrate practical experience of machine tools, maintaining PLC controlled machinery (Siemens preferred), pneumatics and hydraulics systems, material handling conveyor systems, electrical installation work and planned preventative maintenance systems.
• Maintain all plant assets and conduct a regular PPM service and carry out machine malfunction correction work to ensure plant and equipment is available to meet the operational demands placed upon it in a safe and efficient manner.
• Oversee and participate in all large installations and machine removals/re-positioning where required

The role of Service Engineer is commutable from anywhere in the UK as it is a mobile role.

We are seeking to recruit a proven Maintenance Engineer (Shift Engineer) to join a busy fast paced manufacturing plant that supply globally. You will be based on site working a 3-shift system and there will be an induction phase of up to 2 months where you will be working morning and afternoons rotation until familiar with the site. The goal is to continue the shift from a reactive approach (fixing problems as they occur) to a proactive one (preventing problems before they happen). This not only improves efficiency but also helps achieve business targets.

Benefits for the Maintenance Engineer role include:

• £37,846 (plus a shift premium equating to £8,704.54 per annum) £46,550 
• 3 Shift rotation 
• 34 days holiday inc statutory bank holidays
• 7% contribution match stakeholder pension scheme
• Medicash cash plan, eligibility to join the private healthcare scheme
• Cycle to work scheme
• Workwear provided
• Bonus

You must be time served with a mechanical maintenance Apprenticeship (minimum NVQ level 3 or equivalent). Practical working experience in Manufacturing/Industrial Environments. Some duties for the Maintenance Engineer may include:

• Welding & Fabrication – MIG, TIG, and arc welding; metal fabrication and repairs.
• Machine Shop Skills – Lathe operation, milling, grinding, drilling, and general machining.
• Hydraulics – Fault-finding, maintenance, and repair of hydraulic systems, pumps, valves, and actuators.
• Pneumatics – Installation, maintenance, and troubleshooting of pneumatic circuits, compressors, and control valves.
• Mechanical Fitting & Assembly – Bearings, gearboxes, conveyors, motors, chains, and belts.
• Planned & Reactive Maintenance – Conducting routine servicing and emergency repairs to minimise downtime.

The role of Maintenance Engineer is commutable from Derby, Nottingham, Mansfield, and Chesterfield. 

We are a well-respected employer within the Engineering sector and are seeking to recruit proven Multi Skilled Maintenance Engineer, to join our established maintenance team. 

Benefits: 

In return for your Maintenance skills and experience, we offer:

• Starting Salary of c£46,000
• Paid Overtime at Premium Rates 
• Above Average Holiday Entitlement 
• Enhanced Company Pension 
• Company Funded Sick Pay
• Annual Bonus 
• Free On Site Parking 
• Working within a very stable, low pressure engineering sector 

Duties of a Maintenance Engineer    

As a proven Multi Skilled Maintenance Engineer you will be required to undertake both planned and reactive maintenance across our plant, which will require you to have experience of supporting plant and equipment within either a manufacturing, process or production environment. 

Requirements of a Maintenance Engineer  

Ideally you will be apprentice trained but must be qualified to City & Guilds or NVQ standard electrically. Having gained your Maintenance experience from supporting plant and equipment within either a manufacturing, process or production environment. 

This is a great opportunity to move your career into a stable market sector, where you will not only gain an incredible benefits package and ongoing training and development, but also be secure in the knowledge that you will be in a stable working environment, working with a proven and established team of engineers. 

The Maintenance Technician role is commutable from Brownhills, Cannock & Walsall 

As specialists in the field, our client has progressed to become a market leader in high precision engineering throughout the United Kingdom and worldwide. This is a superb opportunity for a Calibration Engineer to join the team on a double day shift. The successful candidate will manage the calibration of all inspection equipment and the control of the issuance and receipts of all gauges.

Benefits for the role of Calibration Engineer: 

• Salary depending on experience £31,000. 
• Double day shift 0600-1400 Monday – Thursday and 0600-1230 Friday. Then the Afternoons are 1400-2400 Monday- Wednesday and 1400-2230 Thursday with Fridays off on the Afternoons week. 
• 34 Days Holiday 
• Company Pension 
• Bonus

Key Duties for the Calibration Engineer: 

• To embrace all the Company’s core values.
• To have ownership and full accountability for all calibration.
• Have a good knowledge of all inspection processes.
• Have a good understanding of all inspection capabilities.
• To ensure all inspection equipment are fully up to date to comply with ISO 9001:2015.
• To work with the purchasing department to ensure all externally calibrated items are delt with quickly, efficiently and within the financial budget.
• To raise and propose the purchase of new replacement inspection equipment when the current items are not fit for purpose.

Requirements of the Calibration Engineer: 

To excel in this role, you must meet the following criteria: 

• Minimum Engineering Apprentice trained NVQ3 
• Proficiency in using calibration equipment and understanding measurement standards is crucial.
• Experience in calibration labs, testing, or related sectors is highly valuable.
• Proficiency in using calibration equipment and understanding measurement standards is crucial.
• Knowledge of relevant industry standards ISO9001.
• Experience with calibration development tools and software is beneficial.

This role is commutable from Derby, Nottingham, Leicester and Tamworth.

Are you seeking a new opportunity within a busy & friendly environment? Are you a qualified CNC Programmer with proven experience programming FANUC and MAZATROL controls?, if so this may be the role for you. We are currently recruiting for a leading specialist organisation based in the North-West who are now looking to strengthen their already established Workshop team by recruiting an additional CNC Programmer. 

• Position: CNC Programmer / Production Engineer 
• Shift: Days only Monday to Friday – Early finish on Friday. 
• Salary: £36,000 - £40,000
• 33days holiday 
• Pension
• On-site parking 

This position is commutable from the following Area’s: Hyde / Ashton-Under-Lyne / Manchester / Altrincham / Stretford / Stockport 

Ideally the CNC Programmer / Production Engineer will hold the following: 

• Previous experience with Programming on MAZAK & FANUC Controls 
• Must be fully trained with proven experience 
• Experience with generating and proving out programs on both CNC Lathes and vertical milling machines. 
• Ability with Setting / operating / milling and turning – mainly FANUC and Mazatrol Controls. 
• Able to work to engineering drawings and 3D Models 
• Proven experience with programming MAZAK integrex multi axis turning centres. 
• Experience in continuous improvement methodologies – Kaizen & 5S 
• Ideally the CNC Programmer will be Apprentice trained holding a HND/HNC in Manufacturing Engineering.